CD-RW drive will only recognise CD-R as CD-RW

CD-RW drive will only recognise CD-R as CD-RW

Post by QW5kcmV3IE » Wed, 05 Jan 2005 23:05:05


Details of my system:
Operating System Microsoft Windows XP Home Edition
OS Service Pack Service Pack 2
Motherboard:
CPU Type Intel Pentium 4A, 2400 MHz (18 x 133)
Motherboard Name Asus P4B533-VM (3 PCI, 1 AGP, 2 DIMM, Video)
Motherboard Chipset Intel Brookdale-G i845G
System Memory 1024 MB (DDR SDRAM)
BIOS Type Award Modular (05/07/02)

IDE Controller Intel(R) 82801DB Ultra ATA Controller
Disk Drive WDC WD1200JB-00CRA1 (111 GB, IDE)
Optical Drive GENERIC CRD-BP1700P (40x/12x/40x CD-RW)
Optical Drive LG DVD-ROM DRD8160B (16x/48x DVD-ROM)
Optical Drive PIONEER DVD-RW DVR-104 (DVD:2x/1x/6x, CD:8x/4x/24x DVD-RW)

When I insert a CD-R into the generic (Sanyo) drive, the icon to represent
the drive changes from CD-RW drive to a large disc icon with a CD-RW tag on
it. When I try to format the disk using VOB Instant Write, an error is always
reported. I assume this is because the disc is showing up as a RW disc.
However, when I place the same CD-R into the DVD-RW drive, its icon changes
from DVD-RW drive to a large disk icon but this time with the correct CD-R
label. This same disc can then be formatted using Instant Write. This means
that when I want to burn CDs, I have to use the slower DVD burner. I not
sure if this is a hardware or a software problem. Can anyone please help?

Ie tried a few things. As I have been unable to gain access to the VOB
site, I decided to uninstall Instant Write and try a different CD burning
programme. This did not solve the problem. When a CD-R was inserted into
the CD-RW drive, Windows explorer showed up the disc to be a CD-RW rather
than a CD-R. XP Burner Pro 3 also detected the disc as CD-RW when it was in
the CD-RW drive. When I inserted the same disc into the DVD-RW drive, XP
Burner Pro 3 detected it as CD-R but it wouldn allow access to it. I use
Music Match Jukebox to burn music CDs but when I tried to do so after
uninstalling Instant Write and installing XP Burner Pro 3, Music Match
Jukebox reported that no CD/DVD drives had been detected and so I had to
restore XP to the state prior to uninstallation.
At least now I can use my DVD-RW to burn CD-R discs but my CD-RW has become
redundant. Although CD-RW shows up correctly, whenever I try to format it, I
always get the n error occurred during formatmessage. If I have a CD-R
in the DVD-RW drive (bear with me, I know this is getting confusing) and then
insert a CD-RW disc into the CD-RW drive, nothing is detected. Windows
simply reports lease insert a disk If I insert a CD-R disc into the
CD-RW drive, while there is a CD-R disk in the DVD-RW drive (correctly
recognised), then the CD-R disc in the CD-RW drive is recognised as a CD-RW
disc, which means that I won be able to format it. Fortunately, the DVD-RW
drive still recognises DVD-R and DVD-RW correctly, although the DVD-RW drive
icon in Windows explorer changes to a CD drive icon with a DVD-R tab on it.
When I disable the DVD-RW drive, I still get CD-R discs showing up as CD-RW.
When using MM Jukebox Plus to burn a music CD, the media type for a CD-R
shows up as CD-RW.

Ie tried http://www.yqcomputer.com/
http://www.yqcomputer.com/ , without success.
 
 
 

CD-RW drive will only recognise CD-R as CD-RW

Post by MS-M » Thu, 06 Jan 2005 07:40:10

his shouldn't really make a difference because you are using third party
software but right click the drive, select properties, go to the recording
tab, if "Enable recording on this drive" is not checked, check it click
apply, close Explorer, open it and see if it makes a difference. You might
have to first open and then close the drive with the disk in the tray.
Conversely, if it is enabled, try removing the check and the same procedure
as above. Some third party software as well as some drives don't always
work as expected within the XP settings.

--
Michael Solomon MS-MVP
Windows Shell/User
Backup is a PC User's Best Friend
DTS-L.Org: http://www.dts-l.org/

"Andrew Mayers" <Andrew XXXX@XXXXX.COM > wrote in message
news: XXXX@XXXXX.COM ...



 
 
 

CD-RW drive will only recognise CD-R as CD-RW

Post by QW5kcmV3IE » Fri, 07 Jan 2005 07:55:03

hanks for the suggestion. However, when I right-click on my 'disks with
removable storage', and choose 'properties', I do not get a 'recording' tab.
Should it be there? I don't have this option for the DVD-RW drive either but
that does work.


"Michael Solomon (MS-MVP)" wrote:

 
 
 

CD-RW drive will only recognise CD-R as CD-RW

Post by MS-M » Fri, 07 Jan 2005 12:18:30

es, it should be but it just dawned on me that one of your burner sis also
a DVD burner and since there is no DVD recording function native to XP,
that's likely the reason why it doesn't show up.

What's going on here, I believe, is that XP's burning function will only
recognize one burner on the system and since it's recognizing the DVD burner
which, apparently, you can use to burn CDs, the other drive is not being
recognized.
--
Michael Solomon MS-MVP
Windows Shell/User
Backup is a PC User's Best Friend
DTS-L.Org: http://www.dts-l.org/

"Andrew Mayers" < XXXX@XXXXX.COM > wrote in message
news: XXXX@XXXXX.COM ...


 
 
 

CD-RW drive will only recognise CD-R as CD-RW

Post by Darth_Meta » Sat, 27 Jan 2007 13:40:54


I have the same problem. My Philips CD-RW will display my CD-R's a
RW's. It does not do this all the time. Sometimes it does recogniz
them as CD-R's. I have tried to use different brands Of CD-R's and tha
does not matter. I can not figure out what makes it do it some of th
time and not all of the time. I have reinstalled Windows XP, it stil
does it. I have tried using NERO 6 instead of Roxio 7, it still doe
it.

I flashed the drive with the newest available ROM, it still does it.

What I do not understand is why does it matter when you have a DVD-R
that also can burn CD-R's and CD-RW's in the computer. I would jus
take out the CD-RW drive all together, unless it has some sentimenta
value to you.

I replaced my Philips CD-RW with a new CD-RW and poof... no proble
anymore.

I can only assume that the laser inside an CD-RW wears out after time
or maybe yours was defective somehow if the CD-RW was a newer model.

Not all CD-R's are the same. You could try using different brands rate
for different speeds. If the drive is older use the older kind o
CD-R's. Such as the kind only rated for say 24X, instead of 48X... a
so on.

But really, just take it out and get a new one or use the DVD-RW fo
burning CD-RW's. These drives are so cheap now it is barely worth th
time to figure it out. I am computer nerd and it does bother me that
can not figure out exactly why mine does this, but some things mus
remain unanswered sometimes

http://www.yqcomputer.com/