PPPoE dailup in Beta 3 is ready?

PPPoE dailup in Beta 3 is ready?

Post by sam » Sat, 18 Sep 2004 16:30:41


Hi,

I m wondering whether PPPoE dailup in Beta 3 is ready?
I m going to move into Beta 3.

Thanks
Sam
 
 
 

PPPoE dailup in Beta 3 is ready?

Post by Kris Kenna » Sun, 19 Sep 2004 03:00:02


What do you mean? I'm not aware of any problems with it for a long
time.

You should use beta 4 though, which fixed other bugs.

Kris

 
 
 

PPPoE dailup in Beta 3 is ready?

Post by sam » Sun, 19 Sep 2004 11:42:19

ris Kennaway wrote:


Hi,

I just turned on the debugging mode of ppp, the ppp.log file now come
with more descriptive info:

Sep 18 10:41:20 fbsd ppp[222]: tun0: Phase: deflink: opening -> dial
Sep 18 10:41:20 fbsd ppp[222]: tun0: Phase: deflink: dial -> carrier
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: Received NGM_PPPOE_ACNAME
(hook "hgc")
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: Received NGM_PPPOE_SESSIONID
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: Received NGM_PPPOE_SUCCESS
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: deflink: carrier -> login
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: deflink: login -> lcp
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: FSM: Using "deflink" as a
transport
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: State change Initial
--> Closed
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: State change Closed
--> Stopped
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: RecvConfigReq(135)
state = Stopped
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MRU[4] 1492
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MAGICNUM[6] 0x146aceae
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x81)
Sep 18 10:41:21 fbsd ppp[222]: tun0: Warning: deflink: Reducing
configured MRU from 1500 to 1492
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: SendConfigReq(59)
state = Stopped
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MRU[4] 1492
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MAGICNUM[6] 0x80da2310
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: QUALPROTO[8] proto c025,
interval 5000ms
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: SendConfigAck(135)
state = Stopped
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MRU[4] 1492
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MAGICNUM[6] 0x146aceae
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: AUTHPROTO[5] 0xc223 (CHAP 0x81)
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: LayerStart
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: State change Stopped
--> Ack-Sent
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: RecvConfigRej(59)
state = Ack-Sent
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: QUALPROTO[8] proto c025,
interval 5000ms
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: SendConfigReq(60)
state = Ack-Sent
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MRU[4] 1492
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MAGICNUM[6] 0x80da2310
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: RecvConfigAck(60)
state = Ack-Sent
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MRU[4] 1492
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: MAGICNUM[6] 0x80da2310
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: State change Ack-Sent
--> Opened
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: LayerUp
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: SendEchoRequest(0)
state = Opened
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: deflink: his = CHAP 0x81,
mine = none
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: Chap Input: CHALLENGE (16 bytes)
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: Chap Output: RESPONSE
( XXXX@XXXXX.COM )
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: RecvEchoReply(0)
state = Opened
Sep 18 10:41:21 fbsd ppp[222]: tun0: Phase: Chap Input: FAILURE (E=691 R=0)
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: LayerDown
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: SendTerminateReq(61)
state = Opened
Sep 18 10:41:21 fbsd ppp[222]: tun0: LCP: deflink: S
 
 
 

PPPoE dailup in Beta 3 is ready?

Post by talo » Tue, 21 Sep 2004 03:47:21


Where you see that CHAP authentification bombs out.

--

Michel TALON