Developer Forum

i, All:

Say I have a model, (see example below)
How can I import this into Orcad 9?

I know there's a document mention about how to manually convert them,
(http://www.mosis.org/Faqs/pspice.pdf), but the procedures seems to long
and not suitable for newbie.


Thanks.

FRT

--------------------------------------------------------------
*These parameters are extracted from the process corner wafers that are
provided by AMI
* In this document slow-fast means: NMOS device slow and PMOS device
fast.
* The fast-slow corner means: NMOS fast and PMOS slow.
* DATE: May 22/02
* Tech: AMI_C5N
* LOT: T22Y_TT (typical) WAF: 3104
* Temperature_parameters=Optimized
.MODEL CMOSN NMOS ( LEVEL = 49
+VERSION = 3.1 TNOM = 27 TOX = 1.39E-8
+XJ = 1.5E-7 NCH = 1.7E17 VTH0 = 0.6696061
+K1 = 0.8351612 K2 = -0.0839158 K3 = 23.1023856
+K3B = -7.6841108 W0 = 1E-8 NLX = 1E-9
+DVT0W = 0 DVT1W = 0 DVT2W = 0
+DVT0 = 2.9047241 DVT1 = 0.4302695 DVT2 = -0.134857
+U0 = 458.439679 UA = 1E-13 UB = 1.485499E-18
+UC = 1.629939E-11 VSAT = 1.643993E5 A0 = 0.6103537
+AGS = 0.1194608 B0 = 2.674756E-6 B1 = 5E-6
+KETA = -2.640681E-3 A1 = 8.219585E-5 A2 = 0.3564792
+RDSW = 1.387108E3 PRWG = 0.0299916 PRWB = 0.0363981
+WR = 1 WINT = 2.472348E-7 LINT = 3.597605E-8
+XL = 0 XW = 0 DWG = -1.287163E-8
+DWB = 5.306586E-8 VOFF = 0 NFACTOR = 0.8365585
+CIT = 0 CDSC = 2.4E-4 CDSCD = 0
+CDSCB = 0 ETA0 = 0.0246738 ETAB = -1.406123E-3
+DSUB = 0.2543458 PCLM = 2.5945188 PDIBLC1 = -0.4282336
+PDIBLC2 = 2.311743E-3 PDIBLCB = -0.0272914 DROUT = 0.7283566
+PSCBE1 = 5.598623E8 PSCBE2 = 5.461645E-5 PVAG = 0
+DELTA = 0.01 RSH = 81.8 MOBMOD = 1
+PRT = 8.621 UTE = -1 KT1 = -0.2501
+KT1L = -2.58E-9 KT2 = 0 UA1 = 5.4E-10
+UB1 = -4.8E-19 UC1 = -7.5E-11 AT = 1E5
+WL = 0 WLN = 1 WW = 0
+WWN = 1 WWL = 0 LL = 0
+LLN = 1 LW = 0 LWN = 1
+LWL = 0 CAPMOD = 2 XPART = 0.5
+CGDO = 2E-10 CGSO = 2E-10 CGBO = 1E-9
+CJ = 4.197772E-4 PB = 0.99 MJ = 0.4515044
+CJSW = 3.242724E-10 PBSW = 0.1 MJSW = 0.1153991
+CJSWG = 1.64E-10 PBSWG = 0.1 MJSWG = 0.1153991
+CF = 0 PVTH0 = 0.0585501 PRDSW = 133.285505
+PK2 = -0.0299638 WKETA = -0.0248758 LKETA = 1.173187E-3
+AF = 1 KF = 0)
*
.MODEL CMOSP PMOS ( LEVEL = 49
+VERSION = 3.1 TNOM = 27 TOX = 1.39E-8
+XJ = 1.5E-7 NCH = 1.7E17 VTH0 = -0.9214347
+K1 = 0.5553722 K2 = 8.763328E-3 K3 = 6.3063558
+K3B = -0.6487362 W0 = 1.280703E-8 NLX = 2.593997E-8
+DVT0W = 0 D