FAQ: Very Frequently Asked Questions (with answers) v1.27

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 03 Jul 2003 02:20:00


ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 17 Jul 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 31 Jul 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 07 Aug 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 21 Aug 2003 02:20:01

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 28 Aug 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 04 Sep 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 11 Sep 2003 02:20:01

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 18 Sep 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 25 Sep 2003 02:20:01

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 02 Oct 2003 02:20:02

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 09 Oct 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 16 Oct 2003 02:20:00

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 23 Oct 2003 02:20:01

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm
 
 
 

FAQ: Very Frequently Asked Questions (with answers) v1.27

Post by davep.new » Thu, 30 Oct 2003 02:20:01

ERY FREQUENTLY ASKED QUESTIONS Compiled by Dave Pearson < XXXX@XXXXX.COM >
$Revision: 1.27 $

In no particular order, here are some of the questions that are most
frequently asked in comp.lang.clipper. In many cases the comp.lang.clipper
FAQ or Google Groups <URL:http://groups.google.com/> would have helped you
find the answer. Where possible the URL that points to those resources is
given as the answer.

DISCLAIMER: The content of this document is simply a compilation of answers
pulled from other sources and other people. No link in this document should
be seen as an endorsement, by me, of any product or service that it might
point at. Only follow links in this document if you understand and accept
that I am in no way responsible for any outcome resulting from your use of
this resource.

If that isn't clear, try this: I am not responsible for your actions, you
are. If you can't assume responsibility for your own actions you should stop
reading this document right now.

* Where is the comp.lang.clipper FAQ?

<URL:http://www.davep.org/clipper/FAQ/>
<URL:http://www.the-oasis.net/clipper.html>

* What is "Internal Error 8002" and how do I stop it?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.8>.

Example Google search:
<URL:http://groups.google.com/groups?q=8002+group%3Acomp.lang.clipper>

* What is runtime error R6003?

FAQ:
<URL:http://www.davep.org/clipper/FAQ/clipper-5.html#ss5.7>

Example Google search:
<URL:http://groups.google.com/groups?q=r6003+group%3Acomp.lang.clipper>

Update (FAQ requires updating with this information):
<URL:ftp://ftp.ca.com/pub/clipper/tools3.zip> fixes the problem.

Alternative:
If you don't have access to the source code for the program that is
displaying this problem and so you can't rebuild using any of the above
fixes you might want to try Attila Feher's program that attempts to
directly patch your executable. You can download this patch program from
<URL:http://www.davep.org/clipper/div0.zip>.

* How do I set FILES= in Windows NT/2000/XP?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+2000+files%3D+group%3Acomp.lang.clipper>

Short answer:
What you used to know as CONFIG.SYS is %SystemRoot%\SYSTEM32\CONFIG.NT.
What you used to know as AUTOEXEC.BAT is %SystemRoot%\SYSTEM32\AUTOEXEC.NT.

* I change AUTOEXEC.BAT and CONFIG.SYS in Windows ME but my changes
disappear after a reboot. What can I do?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+me+autoexec.bat+config.sys+group%3Acomp.lang.clipper>

Short answer:
See <URL:http://www.computerhope.com/issues/ch000361.htm>.

Short answer:
The following URLs contain information on how to reinstate the behaviour
you're used to:

<URL:http://www.geocities.com/mfd4life_2000/>
<URL:http://www.overclockers.com.au/techstuff/a_dos_me/>

* How do I set FILES= in Windows ME?

Example Google search:
<URL:http://groups.google.com/groups?q=windows+ME+files%3D+group%3Acomp.lang.clipper>

Short answer:
Add "PerVMFiles=<value>" to section [386enh] of SYSTEM.INI where the
maximum setting for <value> is 225. You can find out more about this at
<URL:http://support.microsoft.com/support/kb/articles/Q269/0/30.ASP?LN=EN-US&SD=gn&FR=0>.

* I'm