IRQ probe failed (0) axppci33 noname MB

IRQ probe failed (0) axppci33 noname MB

Post by MAPASA ass » Sat, 16 Apr 2005 22:13:04


hen i install the ide hard drive (some model) or cdrom drive (some model)
i have this message:

hda: IRQ probe failed (0)
My system:
axppci33 noname MB

kernel tested is :2.2.18 (default)
2.2.22
file in proc:


debian:~# cat /proc/cpuinfo

cpu : Alpha
cpu model : LCA4
cpu variation : 7
cpu revision : 0
cpu serial number :
system type : Noname
system variation : 0
system revision : 0
system serial number :
cycle frequency [Hz] : 167224080
timer frequency [Hz] : 1024.00
page size [bytes] : 8192
phys. address bits : 34
max. addr. space # : 63
BogoMIPS : 161.48
kernel unaligned acc : 0 (pc=0,va=0)
user unaligned acc : 0 (pc=0,va=0)
platform string : Alpha PC AXPpci33
cpus detected : 1


debian:~# dmesg
Linux version 2.2.22 (herbert@escher) (gcc version 2.95.4 20011002 (Debian
prerelease)) #1 Sat Feb 28 04:00:18 CET 2004
Booting GENERIC on Noname using machine vector Noname from SRM
Command line: ro root=/dev/sda1
Using epoch = 1952
Console: colour dummy device 80x25
Calibrating delay loop... 161.12 BogoMIPS
Memory: 59696k available
Dentry hash table entries: 8192 (order 4, 128k)
Buffer cache hash table entries: 65536 (order 6, 512k)
Page cache hash table entries: 8192 (order 3, 64k)
POSIX conformance testing by UNIFIX
Alpha PCI BIOS32 revision 0.04
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 65536 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
parport0: PC-style at 0x3bc [SPP,PS2]
parport_probe: failed
parport0: no IEEE-1284 device present.
Console: switching to colour frame buffer device 80x30
fb0: DEC 21030 TGA 8-plane frame buffer device
Serial driver version 4.27 with no serial options enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
lp0: using parport0 (polling).
RAM disk driver initialized: 16 RAM disks of 8192K size
loop: registered device at major 7
Floppy drive(s): fd0 is 2.88M
FDC 0 is a National Semiconductor PC87306
sym53c8xx: at PCI bus 0, device 6, function 0
sym53c8xx: not initializing, device not supported
ncr53c8xx: at PCI bus 0, device 6, function 0
ncr53c8xx: 53c810 detected
ncr53c810-0: rev 0x1 on pci bus 0 device 6 function 0 irq 11
ncr53c810-0: ID 7, Fast-10, Parity Checking
scsi0 : ncr53c8xx-3.4.1-20000726
scsi : 1 host.
Vendor: DEC Model: RZ26L (C) DEC Rev: 440C
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: SCSI-CD Model: ReWritable-2x2x6 Rev: 2.00
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
scsi : detected 1 SCSI cdrom 1 SCSI disk total.
ncr53c810-0-<4,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
sr0: scsi3-mmc drive: 2x/6x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.11
ncr53c810-0-<0,*>: FAST-10 SCSI 10.0 MB/s (100 ns, offset 8)
SCSI device sda: hdwr sector= 512 bytes. Sectors= 2050860 [1001 MB] [1.0 GB]
eth0: DC21143 at 0x8800 (PCI bus 0